CE 440 Clean Energy Waste Oil Furnace

  • 420,000 BTU/hour
  • 4,800/85F air flow output CFM/heat rise
  • 3.0 GPH fuel consumption
  • Acceptable fuels: used crankcase oil, transmission fluids, hydraulic oil, #2 heating oil (diesel fuel) & most synthetic oils
  • 230 VAC, 60 Hz, single-phase, 30-amp breaker
  • High-velocity, stainless steel, air-swept heat exchanger
  • Vertical, stainless steel flue tubes
  • 8 diameter stack outlet
  • Tank, wall or ceiling mountable
  • 1,000 plus hour cleaning interval
  • Digital wall thermostat
  • 127l x 34h x 33w
  • UL & cUL listed

Vertical flue tubes resist deteriorations & last longer. Stainless steel heat exchanger & flue tubes that prevent rust & increase the life of the furnace. Heat exchanger & flue tubes are designed to limit heat escape & maximize the heat produced. Flue tubes are swedged, not welded, to resist cracking even with heavy use. Longer service intervals of 1,000+ hours. Easy clean-out with over-center latches on doors and no tools. Digital, programmable burner control for reliable operation in all conditions. Thermostatically-controlled pre-heater easily pass UL cold oil start tests. Burns waste oils including most synthetic oils, transmission fluid, diesel fuel & just about any mixture of oil products. Includes a pre-assembled, tested metering pump. Easy access oil line connector block allows servicing without disconnecting the oil line. Squirrel cage blower for quiet operation. Extensive support network with local representatives from coast to coast, as well as factory support.

Call for pricing: (989) 781-4014