EL 500B Waste Oil Boiler

ASME certified vessel construction, removable rear panel, small footprint, optional integrated domestic hot water coil

  • BTU Input: 499,000 BTU per hour (146 kW per hour)
  • Fuel Flow Rate: 3.6 gallons/hour (13.6 liters/hour)
  • Water Output Temp: (max): 230 F (110 C)
  • BTU Input: 499,000 BTU per hour (146 kW per hour)
  • Fuel Flow Rate: 3.6 gallons/hour (13.6 liters/hour)
  • Water Output Temp: (max): 230 F (110 C)
  • Domestic Hot Water Output: 1 coil: 8 gal/min at 100 F (30 liters/min at 37.8 C)
  • 2 coils: 16 gal/min lower (60 liters/min lower)
  • Boiler Capacity: 52 gallons (200 liters)
  • Inlet Water Temp: 140 F minimum (60 C minimum)
  • Exhaust Flue Diameter: 10 diameter (25.4 cm diameter)
  • System Dimensions: 45 H x 32 W x 68 D (114 cm H x 82 cm W x 173 cm D)
  • Shipping Weight: 1160 lbs (526.17 kg)
  • Shipping Weight w/ 250 gal Tank: 1550 lbs (705 kg)
  • Operating Pressure: Low pressure, 30 psi
  • Approved Fuels: Used crankcase oils, ATF, No. 2 fuel oil, up to 90 weight gear oil and diesel fuel
  • Electrical Requirements: 115 VAC 60Hz, 25 amps, maximum dedicated circuit
  • Regulation and Certification: EPA-approved, UL-listed system, ASME-certified vessel, Canadian Registration (CRN) available in approved provinces for waste oil heating

ASME certified vessel construction, removable rear panel, small footprint, optional integrated domestic hot water coil, digital hour meter, wet floor based heat exchanger, metering fuel pump, accutemp preheater, integrated air compressor, flame retention head, swing open boiler door, AquaSmart technology, backlit display with touch-pad, pressure gauge, dynamic temperature reset.

Call for pricing: (989) 781-4014